Compare products Delete all products
You can compare a maximum of 3 products
Threaded Rod M10x1
Threaded rod M10x1 available in lengths of 1 cm, 1.5 cm, 2 cm, 2.5 cm, 3 cm, 3.5 cm, 4 cm, 5 cm, 7 cm and 10 cm. You can screw these threaded tubes into the top of the lamp holder. Doing so you can create a table lamp. More information
Socket Brass M10x1 | 20mm length
When you make a lamp, the cable gland or wire end may not be long enough. You can use a so-called 'sleeve' for this. A sleeve is nothing more than a connector with which you can connect two wire ends, for example. More information
Bracket for E14 lamp holder
This bracket allows you to mount an E14 fitting (with strain relief) at right angles to a surface. For example, a wall or piece of wood. More information
Bracket for E27 lamp holder
This bracket allows you to mount an E27 fitting (with strain relief) at right angles to a surface. For example, a wall or piece of wood. More information
Metal ring for E14 lamp holder - ⌀40mm | Brass
Use this brass screw ring to clamp, for example, a lampshade to a small E14 fitting with external threading. Diameter: 40 mm. Height: 12 mm. More information
Pendulum tube 100mm - M10x1 | Iron nickel plated- polished
You can use this metal pendant tube / extension tube to adjust a lamp. Because the pendulum tube is hollow on the inside, you can run a cord through it. This way you can hide the cord in a stylish way. More information
Washer M10x1 - ø 20 mm - Thickness 1mm
A washer provides extra support and strength the mounting of a strain relief device, nut or bolt. The flat washer provides better pressure distribution, which also prevents wear and damage to the fastener. Dimensions: ø 20mm, thickness 1mm. More information
Metal ring for E27 lamp holder with external thread - ⌀60mm | Gold
You use this ring in combination with a lamp holder with external thread (E27). For example to clamp a lampshade. More information
Metal ring for E27 lamp holder with external thread - ⌀60mm | Chrome
You use this ring in combination with a lamp holder with external thread (E27). For example to clamp a lampshade. More information
Nut for Threaded Tube - M10x1
Nut for Threaded Tube M10x1 - galvanized (wrench size 14). More information
Adjusting joint M10x1 | Chrome
This adjustable adjusting joint makes it easy to position a lampshade exactly straight. Place the joint directly under the fitting, making it easy to adjust the shade. More information
Socket Brass M10x1 - 12x20mm | Nickel
When you make a lamp, the cable gland or wire end may not be long enough. You can use a so-called 'sleeve' for this. A sleeve is nothing more than a connector with which you can connect two wire ends, for example. More information
Pendulum tube 150mm - M10x1 | Iron nickel plated - polished
You can use this metal pendant tube / extension tube to adjust a lamp. Because the pendulum tube is hollow on the inside, you can run a cord through it. This way you can hide the cord in a stylish way. More information
Nipple plate M10 | Chrome
Do you want to mount a lamp holder on a shelf or wall? This nipple plate offers the solution! A threaded rod is attached to the nipple plate on which you can directly mount a lamp holder. More information
Nipple plate M10 | Brass
Do you want to mount a lamp holder on a shelf or wall? This nipple plate offers the solution! A threaded rod is attached to the nipple plate on which you can directly mount a lamp holder. More information
Metal ring for E27 lamp holder with external thread - ⌀56,5mm | Chrome
You use this ring in combination with a lamp holder with external thread (E27). For example to clamp a lampshade. More information
Metal ring for E27 lamp holder with external thread - ⌀60mm | Dark grey
You use this ring in combination with a lamp holder with external thread (E27). For example to clamp a lampshade. More information
Metal ring for E27 lamp holder with external thread - ⌀56,5mm | Brass
You use this ring in combination with a lamp holder with external thread (E27). For example to clamp a lampshade. More information
Metal ring for E14 lamp holder - ⌀40mm | Chrome
Use this chrome screw ring to clamp, for example, a lampshade to a small E14 fitting with external threading. Diameter: 40 mm. Height: 12 mm. More information
Metal ring for E14 lamp holder - ⌀42,5mm | Gold
Use this golden screw ring to clamp, for example, a lampshade to a small E14 fitting with external threading. Diameter: 42,5mm mm. Height: 11 mm. More information
Ring nipple M10 | Zinc
Use this ring nipple to hang heavier lamps by means of a chain. When mounting on a fitting, a threaded rod/ threaded tube must be ordered with this nipple. More information
Ring nipple M10 with external (male) thread | Brass
Use this brass ring nipple to hang heavier lamps by means of a chain. You can also screw a ring nipple into a fitting and hang it on a hook, for example. The loop is movable. More information