Compare products Delete all products
You can compare a maximum of 3 products
SECOND CHANCE | Lampshade 'Hafthor' metal Green with slight damages
SECOND CHANCE ARTICLE | due to (slight) damage. Please indicate which hood you would like to receive.
This is the sturdy, industrial lampshade 'Hafthor' made of polished metal. With this lampshade you get a real vintage eye-catcher at home! More information
Power cord with switch and plug | Black (flat)
Easily create or renovate your lamp with this ready-assembled connector cord with switch and plug. Executed with the 2-pole flat iron cord Black (WLB0702), combined with black switch and plug. More information
Strain relief external thread 7 mm | Brass
Stylish brass strain relief with external thread (length 7mm). Suitable for use in E14 and E27 fittings with an M10x1 thread. More information
Socket Brass M10x1 | 20mm length
When you make a lamp, the cable gland or wire end may not be long enough. You can use a so-called 'sleeve' for this. A sleeve is nothing more than a connector with which you can connect two wire ends, for example. More information
Fabric Cord Sand & Dark Blue - round linen- zigzag pattern
This high quality fabric cord is wrapped in sand and dark blue zig zag linen. This product is available in a 2-pole (ungrounded) cord. More information
Porcelain Lamp Holder 'Loki' | Coloured Edition | Yellow
This is the grounded version of the Loki lamp holder in a classic yellow colour. This E27 fitting is equipped with earth and a rubber ring. The lamp holder is 72 mm high, has a diameter of 46 mm and can accommodate both 2- and 3-pole cords. More information
Plastic ring for E27 lamp holder - ⌀55mm | Black
Use this white plastic screw ring to clamp, for example, a lampshade to a big E27 lamp holder with external threading. Diameter: 55mm. Height: 15 mm. More information
Fabric Cord Black & White - round, block pattern
This high quality fabric cord is wrapped in black and white woven fabric with a checkered pattern. This product is available in a 2-pole (ungrounded) cord. More information
Metal Lamp Holder 'Olan' dark grey
This is the grounded Olan lamp holder with an external metal thread in dark grey colour and an E27 screw thread. This fitting is 68 mm high, has a diameter of 60 mm and is suitable for 2-pole and 3-pole cord. More information
Metal Lamp Holder 'Bernt' dark grey
This is the ungrounded metal Bernt lamp holder with a sturdy upper and lower rim in dark grey colour with an E27 screw thread. This fitting is 84 mm high, has a diameter of 50 mm and is suitable for 2-pole cord. More information
Fabric Cord Sand (glitter) - round, solid
This high quality fabric cord is wrapped in sand glitter woven fabric. This product is available in a 2-pole (ungrounded) cord. More information
Strain Relief (internal thread) M10x1 | White (matt)
This (matt) white strain relief (M10x1) with internal thread and side screw ensures that the weight of your lamp does not depend entirely on the cord. More information
Plastic Lampholder E14 with flange | Black (Bakelite look)
This is a plastic E14 fitting bakelite look (phenolic resin) external thread with fixed flange (⌀34mm) - half-high in the colour black. More information
Plastic ring for E27 lamp holder - ⌀57mm | White
Use this white plastic screw ring to clamp, for example, a lampshade to a big E27 lamp holder with external threading. Diameter: 57mm. Height: 12 mm. More information
Fabric Cord Cherry Red - round, linen
This high quality fabric cord is wrapped in cherry red round soft-linen (replaces article WLB0074)*. This product is available in a 2-pole (ungrounded) cord. More information
Metal Ceiling Rose 'Hemming' with raised edge - 1 cord | Nickel
This is the 'Hemming' ceiling rose (half sphere) with raised edge, suitable for 1 cord. This metal ceiling cap has a diameter of 100 millimeters and height of 50 millimeters. More information
Calex Lampholder Metal - 'Model Peak' | Bronze (matt)
This is the ungrounded metal Calex 'Peak' lamp holder with a sturdy upper and lower rim in antique bronze colour with an E27 screw thread. This fitting is 71 mm high, has a diameter of 50 mm and is suitable for 2-pole cord. More information
Metal Ceiling Rose 'Latham XL' - 120 mm - 3 cords | White (matt)
This is the Latham XL metal ceiling rose in matt-white. The ceiling rose has a diameter of 120 mm and is 25 mm high. More information
Inner lamp holder 'click fitting' thermoplastic clamp connection - E27 | White
This is an inner lamp holder with clamp connection of in the color white with an E27 thread. This fitting is not grounded. You use this fitting mainly as an inner fitting for a fitting sleeve. Do you want to hang it in sight? Then use article WLB0328. More information
Metal Lamp Holder 'Hallvor' chrome
This is the ungrounded Hallvor metal lamp holder with two milled lines in chrome colour and an E27 screw thread. This fitting is 77 mm high, has a diameter of 47 mm and is suitable for 2-pole cord. More information
Fabric Cord Neon Yellow - round, solid
This high quality fabric cord is wrapped in neon yellow woven fabric. This product is available in a 2-pole (ungrounded) cord. More information
Power cord with switch and plug | Melange beige fabric (round)
Easily create or renovate your lamp with this ready-assembled connector cord with switch and plug. Fitted with a 2-pole electrical cord with a blended beige fabric (round), black cord switch and black plug. More information
Metal Lamp Holder 'Soren' | Black (gloss)
This is the ungrounded metal Soren lamp holder in black (glossy) with an E27 screw thread. This metal fitting is 63 mm high (with strain relief 81.5 mm), has a diameter of 45 mm and is suitable for 2-pole cords. More information
Insulator - Ø 18 mm | Wood
Guide your electrical cord stylishly along your wall or ceiling with this wooden insulator. The insulator is perfect for our twisted and braided electrical cords. More information