Compare products Delete all products
You can compare a maximum of 3 products
Metal Lamp Holder 'Lova' Green
This is the metal Lova lamp holder in a glossy light green color with an E27 screw thread. This fitting is 62 mm high, has a diameter of 40 mm and is suitable for 2-pole cord. More information
Pearl / Bead wood natural | Rectangle, small
This small rectangular bead of wood in the color natural is 20 mm high with a depth and length of 28 mm. In the center of the rectangle is a hole (Ø8mm), through which the fabric cord can be fed. More information
Porcelain Lamp Holder 'Loki' black
This is the ungrounded Loki lamp holder made of black porcelain with an E27 wire. This fitting is 62 mm high (incl. strainrelief 73 mm), has a diameter of 47 mm and is suitable for 2-pole cords. More information
EIVA OUTDOOR 3-way snap-in joint for outdoor use (IP65) | White
With the EIVA 3-way IP65 Click Connection, you can create a waterproof connection for your outdoor lighting in no time. This compact T-connector is part of the innovative EIVA system and specially designed for outdoor use. More information
Metal glass support / carrier | 6 cm
Use this metal glass carrier for hanging (glass) lampshades without a raised edge. Use this glass carrier of 6 cm, for shades whose diameter of the opening is up to 6 cm. Equipped with M10x1 screw thread. More information
Silicone Lamp Holder Kare | Transparent white
This is the Kare silicone fitting in the color transparent white with an E27 thread. This silicone fitting is 95 mm high, has a diameter of 40 mm and is suitable for 2-pole cords. More information
Calex Lampholder Metal - 'Model Peak' | Copper (matt)
This is the ungrounded metal Calex 'Peak' lamp holder with a sturdy upper and lower rim in copper (matt) colour with an E27 screw thread. This fitting is 71 mm high, has a diameter of 50 mm and is suitable for 2-pole cord. More information
Plastic ring for E27 lamp holder - ⌀57mm | Black
Use this black plastic screw ring to clamp, for example, a lampshade to a big E27 lamp holder with external threading. Diameter: 57mm. Height: 12 mm. More information
Porcelain Lamp Holder 'Sif' (E14) | Black
This is the ungrounded 'Sif' lamp holder made of black porcelain with an E27 wire. This fitting is 62 mm high, has a diameter of 35 mm and is suitable for 2-pole cord. More information
Metal Lamp holder 'Sigvor' (E27)| Gold
This is the metal Sigvor lamp holder in gold with an E27 screw thread. This lamp holder is 62 mm high, has a diameter of 42 mm and is suitable for 2-pole cord. More information
Metal Lamp Holder 'Magnus' dark grey - pearl black
This is the ungrounded Magnus metal lamp holder in a shiny dark grey (pearl black) colour and an E27 screw thread. This fitting is 78 mm high, has a diameter of 45 mm and is suitable for 2-pole cord. More information
Metal Lamp Holder 'Magnus' | Antique bronze
This is the ungrounded Magnus metal lamp holder in antique bronze colour and an E27 screw thread. This fitting is 78 mm high (incl. strainrelief), has a diameter of 45 mm and is suitable for 2-pole cord. More information
Foot switch gold
Easily switch a light source on and off via the floor or other flat surface. This ungrounded gold foot switch is basically suitable for connection to 2-pole cord. More information
Pearl / Bead wood black | Rectangle, big
This large rectangular bead of wood in the color black is 30 mm high with a depth and length of 28 mm. In the center of the rectangle is a hole (Ø8mm), through which the fabric cord can be fed. More information
Outdoor iron cord | Black
Bring warmth and character to your outdoor lighting with our round outdoor cable lined with black fabric (viscose). Priced per meter, delivered in one piece. More information
Porcelain Insulator - Ø 20mm | White
Guide your electrical cord stylishly along your wall or ceiling. This insulator is perfect for twisted and braided electrical cords. Diameter Ø 20 mm. More information
Strain Relief (internal thread) M10x1 | Black (matt)
This (matt) black strain relief (M10x1) with internal thread and side screw ensures that the weight of your lamp does not depend entirely on the cord. More information
Socket Brass M10x1 | 20mm length
When you make a lamp, the cable gland or wire end may not be long enough. You can use a so-called 'sleeve' for this. A sleeve is nothing more than a connector with which you can connect two wire ends, for example. More information
Lamp holder 'Arvid' metal with hidden cable clamp | White
This is the elegant matt white E27 lamp holder 'Arvid' with concealed cableholder. This metal lamp holder is 80 mm high, has a diameter of 45 mm and is suitable for connection to 2-pole cords. More information
Ceiling cap silicone 'Facet' - 1 cord - Ø100mm | Grey
This is the silicone 'Facet' ceiling rose in the color grey. This ceiling rose is suitable for one cord, has a diameter of 100 mm and is 50 mm high. More information
Lamp holder 'Tore' metal black
This is the metal 'Tore' lamp holder in black with an E27 screw thread. This lamp holder is 60 mm high, has a diameter of 38 mm and is suitable for 2-pole cord. More information
Pendulum tube 150mm - M10x1 | Iron nickel plated - polished
You can use this metal pendant tube / extension tube to adjust a lamp. Because the pendulum tube is hollow on the inside, you can run a cord through it. This way you can hide the cord in a stylish way. More information
Nipple plate M10 | Chrome
Do you want to mount a lamp holder on a shelf or wall? This nipple plate offers the solution! A threaded rod is attached to the nipple plate on which you can directly mount a lamp holder. More information
Fabric Cord Cream & Green - round, linen - crossed pattern
This high quality fabric cord is wrapped in cream and green round linen with a cross pattern. This product is available in a 2-pole (ungrounded) cord. More information